Fix a Loose Remote Battery Cover

How to Fix a Loose Remote Battery Cover with Tape or Stickers.

If you have a remote control where the battery cover keeps falling off, you don’t need to buy a replacement. Learn how to fix it in a few minutes using simple things you already have at home like tape or stickers.

This works for a Xiaomi Mi Box TV Bluetooth remote or almost any other remote with a loose battery cover. The problem usually happens when the little plastic catch on the cover breaks off. When that happens, the cover won’t stay shut on its own.

The good news is that you can fix it without spending money on replacement parts. All you need is a small piece of tape or a sticker.

What You Will Need

Here are the common household items that work well for this fix:

• Scotch tape (transparent tape)
• Duct tape
• Gaffer tape
• Any sticker you have lying around

How to Choose the Right Tape

Each type of tape works a little differently. Here is what you should know:

Scotch tape – This is very thin so you will barely feel it when you use the remote. It is also cheap. The downside is that it may leave some glue residue when you remove it, but you can clean that off.

Gaffer tape – This is my favorite because it does not leave glue residue. It is also easy to remove later. The only problem is that it costs more than other tapes and is thicker than Scotch tape.

Duct tape – This works fine but leaves a lot of sticky residue behind. It is also thicker than Scotch tape.

Stickers – If you do not have any tape, a regular sticker works as an alternative.

Step-by-Step Guide to Fix the Loose Battery Cover

Step 1: Remove the battery cover

Take the loose cover off the remote so you can work on it.

Step 2: Clean off old glue residue

If your remote has old glue or sticky residue on it, clean that area. Use your finger to rub and gather the glue into one spot. Then use a piece of plastic to scrape it off. You can also just wipe it with a cloth.

The better you clean the surface, the better the new tape will stick.

Step 3: Cut a small piece of tape

You only need a small piece. Cut it with scissors so the edges are smooth. If you tear gaffer tape by hand, it will have little strands of fabric on the edges. That still works, but cutting gives you a cleaner look.

For Scotch tape, you can just tear it with your fingers.

Step 4: Place the tape on the cover

Put the tape across the battery cover where it meets the remote body. Press it down firmly. Make sure the tape holds the cover in place so it cannot slide open.

Step 5: Press firmly

Push the tape down all the way so it sticks well. Run your finger over it to make sure there are no loose edges.

Step 6: Put the cover back on the remote

Snap the battery cover back onto the remote. The tape should now hold it secure.

Which Tape Works Best for Daily Use?

For a remote you hold every day, Scotch tape is actually the best option. Here is why:

• It is very thin so you do not feel it against your fingers
• It does not change how the remote feels in your hand
• It is cheap and easy to replace when needed

If you use thicker tape like duct tape or gaffer tape, you may feel a bump on the back of your remote. For some people that is annoying, for others it does not matter.

How to Make the Fix Last

To keep your tape repair working for a long time:

• Clean the surface well before applying the tape
• Press the tape down firmly so it sticks completely
• If the tape starts to peel off after a few weeks, just remove it and put on a fresh piece

A Note About Rechargeable Batteries

It is a good habit to use rechargeable batteries in your remotes. They save money and are better for the environment. The fix described here works the same no matter what kind of batteries you use.

Final Thoughts

Learn how to fix a loose battery cover in just a few minutes without buying any special tools or replacement parts. This trick works for most remotes and even for other battery-powered devices that have the same problem.

If your remote is old or has a broken plastic catch, do not throw it away. A small piece of tape or a sticker is usually all you need to make it work like new again.