Category: Back to school

SanDisk Extreme Pro 200MBs vs 95MBs Speed Test
SanDisk Extreme Pro 200MBs in Kingston MobileLite Plus SD Card Reader speed test. Fastest third-party card reader speed tested. Reaches 150MB/s write speed and 185MB/s read speed.

SanDisk Extreme Pro 200MBs in Kingston MobileLite Plus SD Card Reader Speed Test
Sandisk extreme pro 200mb vs 95mb speed test in third-party reader.
SanDisk Extreme Pro 200MBs 256GB Speed Test
Compare Sandisk Extreme Pro200MB/S with Extreme Pro 95MB/S SD card fake or original text printed on SD card looks fake but not sure.
This is the unboxing of the SanDisk Extreme Pro 95MB/S

Sandisk Extreme Pro 95MB/S Unboxing
Unboxing of Sandisk Extreme Pro 200MB/S.

Sandisk Extreme Pro 200MB/S unboxing
Sandisk Extreme Pro 200MB/s vs 95MB/s speed test.

Sandisk Extreme Pro 200MB/s vs 95MB/s
The reader is Transcend and it does not reach anywhere near the 200mb/s speed.
Speed tesf of Sandisk Extreme Pro 95MB/s SD card.
SanDisk Extreme Pro 95MBs 64GB Speed Test
Speed tesf of Sandisk Extreme Pro 200MB/s SD card.
SanDisk Extreme Pro 200MBs 256GB Speed
Sandisk Extreme Pro SD card speed of 200MB/S is achieved on the Sandisk Exteme Professional SD and MicroSD card reader.
Third party card readers can reach 140MB/S and not sure in the camera what will be the writig speed but on Panasonic Lumix S5 I was able to use an old Extreme Ultra SD card without problems but I only use the 72MB/s bitrate codec HEVC 10 bit HLG2100.
When filming with higher bitrate codecs, a faster card is needed.
The cards tested in rhe video are Sandisk Extreme Pro UHS-I v30 SD cards.
A Sandisk Extreme Pro 300MB/S would need a professional SD card reader.
The Lumix S5 has 2 SD card slots and slot 1 sulports UHS-I and UHS-II SD cards while slot 2 only supports UHS-1 cards.
With Panasonic Lumix S5 you don’t need to use an expensive Uhs-ii card.
A Sandisk Extreme Pro 170MB/S or Sandisk Extreme Pro 200MB/S will work great!
You can even use Sandisk Extreme.Pro 95MB/S.
2022-10-05
How to clean a PC keyboard Wash keyboard keys Logitech G19
How to clean a PC keyboard Wash keyboard keys Logitech G19 without looking any key caps.

How to clean a PC keyboard
PC keyboards can gather dust and food particles under the keys easily and in time, you can have a lot of dirt under the computer keys.
Watch in rhe video how to remove the keyboard keys and wash them.
Cleaning the dirt between the keys and reinstalling all keys back in the keyboard.
Had to clean the keyboard because the keys became harder to press and the keyboard was full of dust in the space between the keys.
The keyboard shown is a Logitech G19 and I really like it. Have been using it for at least 6 years and it’s a great keyboard.
Before removing keys
Before removing the keys take a few pictures with your phone of the whole keyboard and with separate sections closer.
You will use these pictures later to know how to reassemble they keys and not the the keys mixed later during reassembly.
Remove PC Keyboard Keys
Use 2 spudger tools to remove the key caps or scissors or ideally a dedicated tool for removing PC keyboard keys.
Clean PC Keyboard Key Caps Removed Ready to Vacuum
Wash the keys
Remove any metal parts from enter key or spacebar key.
Place all the plastic keys in a plastic bottle. Any bittle will work fine but a larger opening bottle will be easier to fit the keys in.
Put some dishwashing soap same as if you were washing a few plated.
Close the bottle and agitate the keys inside until you see the water color turns a bit dark.
PC Keyboard Keys Caps Washing
The darker the water, the more dirt is removed from the keys.
You can let the keys sit in the bottle 1 hour and then shave the bottle again to clean the keys more.
Rinse and dry keys
Rinse keys with fresh clean tap water and place the clean keys on a towel.
Use a paper towel to wipe and remove water faster.
Clean PC Keyboard Key Caps
Let the keys sit until completely dry. Idally you should wipe most water with paper towels and then let the keys sit in the sun for 30 min to 1 hour.
Vacuuming PC Keyboard
Vacuum the PC keyboard when all keys are removed using a gentle brush vacuum head or no brush head at all.
PC Keyboard Vacuum Keys
After vacuuming, use a wet wipe to clean the space between the keys.
Reassemble Keys on PC Keyboard
PC Keyboard and keys are all clean and dry, it’s time to reassemble everything together.
Reinstall any metal rods or pieces on the keys.
Place all the keys on a towel in rhe correct layout as it was in the pictures you took earlier.
PC Keyboard Key Caps Removed Cleaned
Starting from left to right, insert keys one by one and press the newly inserted key to make sure it works normally.
Take extra care to insert the metal rods of the space or enter keys in the slots where they sit to act as a stabilizer for large keys.
Once all keys are back in place press all keys one by one again to make sure they work and slide normally without any unusual resistance.
Keyboard is ready to use, enjoy it!
2022-09-29
Simple Highlighter Pen Hacks, Fix Dry Markers Change Colors
Simple highlighter pen hacks. How to fix dry markers and change colors.

Fix Dry Markers Change Colors
These are 2 simple hacks for fixing and how to refill and revive dry highlighter marker pens and how to change the highlighter pen color to any color you want.
When the highlighters become dry they don’t work anymore and will not highlight text.
You could buy a new one but this trick will make your highlighter work again with a few easy steps.
If you prefer to change the color and not only revive the highlighter, you can also do that!
You can combine multiple colors and make a rainbow with your highlighter pen.
Highlighter refill vs yellow printer ink
You can use printer ink or special highlighter refill ink to refill your highlighter.
Fix dry highlighter pen
To revive a dry highlighter you can open it as shown in the video and take the sponge out of the highlighter pen.
Keep rhe highlighter pen sponge for a few seconds 5-30 seconds in a distilled water solution or mix 50% plain house vinegar (4-5%) with 50% water.
If you prefer no vinegar smell, you can use plain deionized water or a reduced vinegar concentration from 50% to 10-20% vinegar mix. Please note you should only use house vinegar with 4 to 5% concentration and not higher.
When you mix half 4% vinegar with half water, the solution becomes 2% vinegar acidity concentration.
Enjoy your new highlighter pen!
2022-09-26