Parkside Rotary Tool Cutting Discs Accessories Test.
Learn about the cutting discs that come with the Parkside PFBS 12C7 rotary tool and which extra accessories work better for cutting tasks.
The Parkside rotary tool includes cutting discs in the box, but they have a problem. They break very easily. I tested both the included discs and some extra reinforced discs I bought separately. Here is what I found.
This guide covers the Parkside PFBS 12C7, a 12V cordless rotary tool from Lidl. It is a budget-friendly alternative to name brand rotary tools.
Quick Specs of the Tool
· Battery: 12V lithium-ion (1.3 Ah, 15.6 Wh)
· Rotation speed: 5,000 to 25,000 RPM
· Maximum bit size: 3.2 mm
· Maximum disc size: 25 mm
· Weight: about 380 grams
· Charging: USB-C (charger not included)
The Included Cutting Discs – A Problem
The rotary tool comes with 44 attachments in total. Some of those are cutting discs. They are thin and brown in color.
The problem is that these discs are very brittle. While trying to install one, I pressed on it slightly from the side and it broke immediately. This happened before I even turned the tool on.
When these discs break during use, small pieces can fly out at high speed. This is dangerous. Always wear safety glasses when using any rotary tool.
The Extra Cutting Discs I Bought
I purchased an extra accessories pack that included cutting discs. This pack contained two different sizes of discs.
What came in the extra pack:
· Smaller discs (similar size to the included ones)
· Larger discs (24 mm and 32 mm sizes)
· Discs with reinforcement (a stronger design)
· Mounting shanks for attaching the discs
The reinforced discs are much stronger than the brown ones that came with the tool. They have extra material around the center that helps prevent them from shattering.
Testing the Reinforced Discs
I attached one of the larger reinforced discs to the rotary tool to test how well it cuts.
Here is how I tested it:
· I locked the spindle using the lock button
· I removed the broken disc from before
· I installed the new reinforced disc with the mounting shank
· I tightened everything using the included wrench
· I wore safety glasses
I tested the disc on a piece of plastic. Starting at a lower speed (setting 3), the disc cut through the plastic. It worked well with no signs of breaking.
At higher speeds, the disc cut even faster and easier. The plastic started to melt a little from the heat and friction, but the disc stayed intact.
Unlike the included brown discs, the reinforced disc did not crack or shatter during testing.
Important Safety Notes
Cutting discs spin at very high speeds. The tool can reach 25,000 RPM. The extra discs I tested are rated for up to 30,000 RPM.
Always follow these safety rules:
· Wear safety glasses or goggles
· Keep the tool away from your body while cutting
· Make sure the disc is tightened properly before starting
· Start at a lower speed and increase as needed
· If a disc breaks, small pieces will fly left and right
The broken pieces from a shattered disc are small but move very fast. They can hurt your eyes or skin.
Storage Tips
The included discs are fragile. I stored them in the original box along with the other attachments. Keep them in a compartment where they do not rub against metal or hard objects.
The larger reinforced discs did not fit in the original box compartments. I kept them in their own packaging or loose in the box. Just be careful not to crush them.
What I Learned
The included brown discs:
· Very brittle
· Break easily, even during installation
· Still usable but handle with extreme care
· Best for very light cutting only
The extra reinforced discs:
· Much stronger
· Did not break during testing
· Available in larger sizes
· Worth buying separately
Final Thoughts
The Parkside rotary tool itself works well for a budget cordless option. But the included cutting discs are not great. They break too easily.
If you plan to do any cutting with this tool, buy extra reinforced cutting discs separately. They cost a little more but they are safer and last longer. The small investment is worth it to avoid having discs shatter while you work.
Leave a Reply