How to Connect Wired Headphones with USB-C to 3.5mm Adapter on iPhone

Apple USB-C to 3.5mm headphone jack adapter and wired earphones on desk

If you want to use your favorite wired headphones or an external microphone with a modern iPhone, you need a USB-C adapter. I’ll show you how to plug in 3.5mm audio cables and test sound recording in a few seconds.

1. Inspect Your Audio Cables

Take your wired headphones and locate the 3.5mm audio jack. For headsets with microphones, ensure it has a 4-pole (TRRS) connector.

Plugging standard 3.5mm headphone jack firmly into female adapter end
Plug 3.5mm Earphone Jack into Adapter

2. Connect Headphone Jack to Adapter

Plug the 3.5mm headphone pin firmly into the circular opening of the USB-C adapter until you feel a positive click.

Plugging USB-C connector into the bottom port of the iPhone
Insert USB-C Adapter into iPhone

3. Plug Adapter into Your iPhone

Insert the USB-C end directly into the charging port on the bottom of your iPhone 15, iPhone 16, or newer model.

Testing stereo audio playback through connected wired headphones
Test Audio Playback in Music App

4. Test Sound Playback

Open the **Music** app or **YouTube** and start playing audio. Sound will route through your headphones immediately without any bluetooth setup.

Recording voice sample in Voice Memos app to verify inline microphone
Test Microphone Recording in Voice Memos

5. Test External Microphone

Open the **Voice Memos** app and tap the red **Record** button to verify your headset microphone captures clear voice audio.

Helpful Tips

No additional software or drivers are required. The adapter is plug-and-play and also works with portable audio amplifiers, car AUX inputs, and external lapel microphones. For more hardware guides, visit our iPhone Guides collection.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.