How to Update Your Nikon D810 DSLR Camera Firmware

Nikon DK 17M Magnifying Eyepiece and DK 19 Rubber Eyecup

How to Update Your Nikon D810 DSLR Camera Firmware.

As an Amazon Associate I earn from qualifying purchases.

I’ll show you how to update the firmware on a Nikon D810, but these steps are similar for most Nikon DSLR cameras.

Why Update Your Camera’s Firmware?

Firmware updates often fix bugs, add new features, or improve existing ones. If you’re experiencing any issues with your camera, checking for a firmware update should be one of your first troubleshooting steps.

Before You Start

What you need:

  • A fully charged camera battery (this is important!)
  • A formatted memory card
  • Your camera’s USB cable
  • A computer with internet access

Step-by-Step Update

  1. First, check your current firmware version:
  • Turn on your camera
  • Go to the Setup Menu
  • Select “Firmware version”
  • Note down the current version number
  1. Download the new firmware:
  • Visit the Nikon Download Center at downloadcenter.nikonimglib.com
  • Find your camera model (in this case, the D810)
  • Download firmware version 1.14
  • Save the file to your computer
  1. Prepare your memory card:
  • Format the memory card in your camera
  • Create a new folder called “NIKON” on the card
  • Inside that folder, create another folder called “FIRMWARE”
  • Copy the downloaded firmware file into the FIRMWARE folder
  1. Update your camera:
  • Insert the prepared memory card into your camera
  • Ensure your battery is fully charged
  • Go to Setup Menu > Firmware update
  • Follow the on-screen instructions
  • Wait for the update to complete (don’t turn off the camera!)

Important Warnings

  • Never turn off the camera during the update process
  • Don’t remove the memory card while updating
  • Don’t press any buttons until the update is complete
  • Keep the battery fully charged

Recommended Camera Accessories

If you’re looking to upgrade your photography gear, here are some recommended accessories for your Nikon DSLR:

Need a New Camera?

If you’re in the market for a new camera, consider these options:

Final Tips

The update process usually takes just a few minutes. If you run into any issues, check Nikon’s official support website or contact their customer service. Remember to always read the firmware update notes to understand what changes and improvements are included in the new version.

For specific firmware versions and detailed instructions for your camera model, visit the official Nikon Download Center at downloadcenter.nikonimglib.com.

Nikon D810 – DK-17M magnifying eyepiece and DK-19

Nikon D810 – DK-17M magnifying eyepiece and DK-19 rubber eyecup installation

How to install the magnifier eye piece DK-17M and
the large rubber eye cup DK-19 on a D810.

This installation can be done on any Nikon SLR or DSLR that has the round screw-in type viewfinder eye piece.
Supported cameras:
D4 series, D3 series, D2 series, D1 series, Df, D800 series, D700, F6, F5 and F4 series cameras and in the new D850, D500 and D5

Nikon EN-EL15a fake vs real battery

Bought this battery on eBay, the Nikon EN-EL15a battery.
What do you think? Is this battery a fake / counterfeit or is it real / genuine?
Confirmed fake. Check the comments.

Comparing the battery bought online with a EN-EL15 battery that is genuine.

To be sure, buy only from well known shops and distributors.

Elgato Cam Link 4k Connect Nikon DSLR Camera HDMI to OBS D810

Elgato Cam Link 4k HDMI Capture card dongle test with Nikon D810 camera HDMI output.

The Nikon D810 uses a mini HDMI usb connector. The Elgato Cam Link 4k connects HDMI full size to USB 3.0 gold plated connection and USB extension cable.

Elgato is a Corsair Memory brand so that’s interesting.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.